Socket Weld Fittings

  • Home
  • Socket Weld Fittings

Socket Weld Fittings

SHRIBHAIRAV METAL CORPPRATION is Specialist approved manufacturer, supplier & exporter of Socket Weld Fittings known for competitive pricing & require minimum time to deliver Socket Weld Fittings at you doorstep. Our Socket Weld Fittings come in a variety of classes and material grades for any application. Socket Weld fittings are available in class 3000, 6000 and 9000 and are manufactured in compliance with ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

We are socket weld fittings manufacturers in india which are available in all major stainless steel, carbon steel and alloy steel grades. We offer various types of forged Socket Weld 90 Deg Elbow, Socket Weld 45 Deg Elbow, Socket Weld Equal Tee, Socket Weld Unequal Tee, Socket Weld Cross, Socket Weld Unequal Cross, Socket Weld Half Coupling, Socket Weld Full Coupling, Socket Weld Cap. We also manufacture and supply fittings specially manufactured to meet your custom requirements in a variety of stainless steel and special alloy grades.

Stainless Steel Socket Weld Fittings
  • Stainless Steel Socket Weld Fittings

Stainless Steel Socket Weld Fittings Specification

Standard : ASTM A182/ ASME SA182
Grades : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Dimensions : ANSI B16.11, MSS SP-79, 83, 95, 97, BS 3799
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT / Threaded
Size : 1/2″ NB TO 4″ NB
Pressure : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc

Testings (Destructive, Non Destructive):

  • Positive Material Identification - PMI Testing
  • Chemical Analysis - Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test
Chemical Composition
Grade Applicable Standards C max Si max Mn max P max S max Ni Cr Mo Others
304 GB 0Cr18Ni9 0.07 1.00 2.00 0.035 0.030 8.00 - 11.00 17.00 - 19.00 - -
JIS SUS304 0.08 1.00 2.00 0.040 0.030 8.00 - 11.00 18.00 - 20.00 - -
BS 304S18 0.06 0.20 - 1.00 0.50 - 2.00 0.040 0.030 9.0 - 12.0 17.0 - 19.0 - -
ASTM TP304 0.08 1.00 2.00 0.045 0.030 8.0 - 11.0 18.0 - 20.0 - -
DIN 1.4301 0.07 1.0 2.0 0.045 0.030 8.5 - 10.5 17.0 - 19.0 - -
304L GB 00Cr19Ni10 0.03 1.00 2.00 0.035 0.030 8.00 - 12.00 18.00 - 20.00 - -
JIS SUS304L 0.030 1.00 2.00 0.040 0.030 9.00 - 13.00 18.00 - 20.00 - -
BS 304S14 0.03 0.20 - 1.00 0.50 - 2.00 0.040 0.030 10.0 - 13.0 17.0 - 19.0 - -
ASTM TP304L 0.035 1.00 2.00 0.045 0.030 8.0 - 13.0 18.0 - 20.0 - -
DIN 1.4306 0.03 1.0 2.0 0.045 0.030 10.0 - 12.5 18.0 - 20.0 - -
321 GB 0Cr18Ni9Ti 0.12 1.00 2.00 0.035 0.030 8.00 - 11.00 17.00 - 19.00 - Ti: 5(C - 0.02) - 0.08
JIS SUS321 0.08 1.00 2.00 0.040 0.030 9.00 - 13.00 17.00 - 19.00 - Ti > 5xC
BS 321S18 0.08 0.20 - 1.00 0.50 - 2.00 0.040 0.030 10.0 - 13.0 17.0 - 19.0 - Ti: 5xC - 0.06
ASTM TP321 0.08 1.00 2.00 0.045 0.030 9.0 - 12.0 17.0 - 19.0 - Ti: 5(C + N) - 0.07
DIN 1.4541 0.08 1.0 2.0 0.045 0.030 9.0 - 12.0 17.0 - 19.0 - Ti: 5xC - 0.07
316 GB 0Cr17Ni12Mo2 0.08 1.00 2.00 0.035 0.030 11.00 - 14.00 16.00 - 18.50 2.00 - 3.00 -
JIS SUS316 0.08 1.00 2.00 0.040 0.030 10.00 - 14.00 16.00 - 18.00 2.00 - 3.00 -
BS 316S18 0.07 0.20 - 1.00 0.50 - 2.00 0.040 0.030 11.0 - 14.0 16.0 - 18.5 2.0 - 3.0 -
ASTM TP316 0.08 1.00 2.00 0.045 0.030 11.00 - 14.00 16.0 - 18.0 2.00 - 3.00 -
DIN 1.4401 0.07 1.0 2.0 0.045 0.030 10.5 - 13.5 16.5 - 18.5 2.0 - 2.5 -
316L GB 00Cr17Ni14Mo2 0.03 1.00 2.00 0.035 0.030 12.00 - 15.00 16.00 - 18.00 2.00 - 3.00 -
JIS SUS316L 0.030 1.00 2.00 0.040 0.030 12.00 - 16.00 16.00 - 18.00 2.00 - 3.00 -
BS 316S14 0.03 0.20 - 1.00 0.50 - 2.00 0.040 0.030 12.0 - 15.0 16.0 - 18.5 2.0 - 3.0 -
ASTM TP316L 0.035 1.00 2.00 0.045 0.030 10.00 - 14.00 16.0 - 18.0 2.00 - 3.00 -
DIN 1.4404 0.030 1.0 2.0 0.045 0.030 11.0 - 14.0 16.5 - 18.5 2.0 - 2.5 -
347 GB 0Cr18Ni11Nb 0.08 1.00 2.00 0.035 0.030 9.00 - 13.00 17.00 - 19.00 - Nb+Ta: 10xC - 1.00
JIS SUS347 0.08 1.00 2.00 0.040 0.030 9.00 - 13.00 17.00 - 19.00 - Nb >10xC
BS 347S18 0.08 0.20 - 1.00 0.50 - 2.00 0.040 0.030 10.0 - 13.0 17.0 - 19.0 - Nb: 10xC～20XC - 1.00
ASTM TP347 0.08 1.00 2.00 0.045 0.030 9.0 - 13.0 17.0 - 19.0 - Nb: 10xC - 1.10
DIN 1.4550 0.08 1.0 2.0 0.045 0.030 9.0 - 12.0 17.0 - 19.0 - Nb: 10xC - 1.00
310S GB 0Cr25Ni20 0.08 1.00 2.00 0.035 0.030 19.00 - 22.00 24.00 - 26.00 - -
JIS SUS310S 0.08 1.50 2.00 0.040 0.030 19.00 - 22.00 24.00 - 26.00 - -
BS - - - - - - - - - -
ASTM TP310S 0.08 1.00 2.00 0.045 0.030 19.0 - 22.0 24.0 - 26.0 - -
DIN - - - - - - - - - -
316Ti GB 0Cr18Ni12Mo2Ti 0.08 1.00 2.00 0.035 0.030 11.00 - 14.00 16.00 - 19.00 1.80 - 2.50 Ti: 5xC - 0.07
JIS SUS316Ti 0.08 1.00 2.00 0.040 0.030 10.00 - 14.00 16.00 - 18.00 2.00 - 3.00 Ti > 5xC
BS - - - - - - - - - -
ASTM TP316Ti 0.08 0.75 2.00 0.045 0.030 10.0 - 14.0 16.0 - 18.0 2.00 - 3.00 Ti: 5(C + N) - 0.07
DIN 1.4571 0.08 1.0 2.0 0.045 0.030 10.5 - 13.5 16.5 - 18.5 2.0 - 2.5 Ti: 5xC - 0.07
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Duplex & Super Duplex Steel Socket Weld Fittings
  • Duplex/Super Duplex Socket Weld Fittings

Duplex & Super Duplex Steel Socket Weld Fittings Specification

Standard : ASTM A182/ ASME SA182
Grades : UNS S32205, UNS S31803, UNS S32750, UNS S32760
Dimensions : ANSI B16.11, MSS SP-79, 83, 95, 97, BS 3799
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT / Threaded
Size : 1/2″ NB TO 4″ NB
Pressure : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc

Manufactured Socket Weld Fittings go with quality assurance test under professionals some of the tests are:

  • Positive Material Identification - PMI Testing
  • Chemical Analysis - Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test
  • X-ray testing (radiographic & radioscopic)
Grade C Mn Si P S Cr Mo Ni N Fe
S31803 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.50 - 3.50 4.50 – 6.50 0.8 – 0.20 63.54 min
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min
Grade Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
Duplex 2205 7.805 0.285 1420 – 1465 2588 – 2669
Super Duplex 2507 7.8 0.281 1350 2460
Nickel Alloy Socket Weld Fittings
  • Nickel Alloy Socket Weld Fittings

Nickel Alloy Socket Weld Fittings Specification

Standard : ASTM B564 / ASME SB564
Grades : Nickel 200 / 201, Monel 400 / K500, Inconel 600, Inconel 625, Inconel 718, Incoloy 800, Incoloy 825, Hastelloy C276 / C22, / B2, Alloy 20, Titanium Gr 2/5, Cu-Ni 90/10 (C70600), Cu-Ni 70/30 (C71500)
Dimensions : ANSI B16.11, MSS SP-79, 83, 95, 97, BS 3799
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT / Threaded
Size : 1/2″ NB TO 4″ NB
Pressure : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc

Non-destructive testing includes:

  • Eddy current testing
  • X-ray testing (radiographic & radioscopic)
  • Ultrasonic testing
  • Hydro testing
  • Positive material identifications testing

Destructive testing includes:

  • Tensile tests (including hot tensile testing)
  • Impact tests (up to -196 degrees Celsius)
  • Bend Tests
  • Hardness tests
  • Intercrystalline corrosion test in accordance with ASTM A262 practice E
  • Pitting corrosion test in accordance with ASTM G48A
  • Metallurgical tests (metal analysis, macro & micro examination)
Grade C Mn Si S Cu Fe Ni Cr
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min -
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min -
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
Inconel 601 0.10 max 1.0 max 0.5 max 0.015 max 1.0 max Balance 58.0 – 63.0 21.0 – 25.0
Inconel 625 0.10 max 0.50 max 0.50 max 0.015 max - 5.0 max 58.0 min 20.0 - 23.0
Inconel 718 0.08 max 0.35 max 0.35 max 0.015 max 0.30 max - 50.00 - 55.00 17.00 - 21.00
Incoloy 800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00
Incoloy 800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00
Incoloy 800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00
Incoloy 825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min -
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min -
Hastelloy C276 0.010 max 1.00 max 0.08 max 0.03 max - 4.00 – 7.00 50.99 min* 14.50 – 16.50
Hastelloy C22 0.010 max 0.50 max 0.08 max 0.02 max - 2.00 – 6.00 50.015 min* 20.00 – 22.50
Hastelloy B2 0.02 max 1.0 max 0.1 max 0.03 max - 2.0 max Bal 1.0 max
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 / 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %
Incoloy 800/H/HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %
Incoloy 825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Hastelloy B2 9.2 g/cm3 1370 °C (2500 ºF ) Psi – 1,10,000 , MPa – 760 Psi – 51000 , MPa – 350 40 %
Carbon Steel Socket Weld Fittings
  • Carbon Steel Socket Weld Fittings

Carbon Steel Socket Weld Fittings Specification

Grade : ASTM A105 Gr 70, ASTM A350 Grade LF1, LF2, LF3 / ASTM A694 Gr F42, F46, F48, F50, F52, F56, F60, F65, F70
Dimensions : ANSI B16.11, MSS SP-79, 83, 95, 97, BS 3799
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT / Threaded
Size : 1/2″ NB TO 4″ NB
Pressure : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc

Manufactured Forged Socketweld Fittings go with quality assurance test under professionals some of the tests are:

  • Positive Material Identification - PMI Testing
  • Chemical Analysis - Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Intergranular Corrosion (IGC) Test
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test
Element C Mn Si Ph Su Mo Cr Ni
Carbon Steel 0.08 – 0.15 0.30 – 0.60 0.15 – 0.50 0.025 max * 0.025 max * 0.90 – 1.10 2.00 – 2.50 0.5 max
Property Ultimate Tensile Strength * 0.2 % Yield Strength * Elongation * Reduction of Area * Charpy Impact Toughness Hardness (Brinell)
Values 95 min Ksi (655 Mpa) 75 min Ksi (517 Mpa) 17 % min 35 % min 42 mean/ 33 min J at –18o C 197 – 237 BHN (75 Ksi min)
Alloy Steel Socket Weld Fittings
  • Alloy Steel Socket Weld Fittings

Alloy Steel Socket Weld Fittings Specification

Standard : ASTM A182 / ASME SA1824
Grades : A182 Grade F1, F2, F5, F9, F11, F12, F22, F91
Dimensions : ANSI B16.11, MSS SP-79, 83, 95, 97, BS 3799
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT / Threaded
Size : 1/2″ NB TO 4″ NB
Pressure : 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc

Manufactured Forged Socketweld Fittings go with quality assurance test under professionals some of the tests are:

  • Mechanical test/ hardness test/ tensile test
  • Chemical test/ spectral test
  • Positive material test
  • Destructive and no destructive test
  • Micro/ macro test
  • Pitting resistance tests
  • Intergranular corrosion test
  • Flattening/ flaring test
  • Ultrasonic test
  • Visual inspection test
  • Third party inspection report
  • X-ray testing (radiographic & radioscopic)
Chemical Composition of ASTM A182 Low Alloy Steels, %
Grades C Mn P S Si Cr Mo Others
F1
 0.28 0.60-0.90 0.045 0.045 0.15-0.35 - 0.44-0.65 -
F2 0.05-0.21 0.60-0.80 0.040 0.040 0.10-0.60 0.50-0.81 0.44-0.65 -
F5 0.15 0.30-0.60 0.030 0.030 0.50 4.0-6.0 0.44-0.65 *A
F9 0.15 0.30-0.60 0.030 0.030 0.50-1.00 8.0-10.0 0.90-1.10 -
F11 0.05-0.15 0.3-0.6 0.03 0.03 0.5-1 1-1.5 0.044-0.65 *C
F12 0.15 max 0.3-0.6 0.03 0.03 0.5 4-6 0.44-0.65 -
F22 0.05-0.15 0.3-0.6 0.045 0.03 0.5 0.8-1.25 0.44-0.65 -
F91 0.08-0.12 0.30-0.60 0.020 0.010 0.20-0.50 8.0-9.5 0.85-1.05 *D
F92 0.07-0.13 0.30-0.60 0.020 0.010 0.50 8.5-9.5 0.30-0.60 *E
Chemical Composition Ranges and Limits, percent
AISI Number C Mn

P

Max.

S

Max.

Si

Ni

Cr

Mo
AISI 4130 0.28/0.33 0.40/0.60 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4137 0.35/0.40 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4140 0.38/0.43 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4142 0.40/0.45 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4145 0.43/0.48 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4147 0.45/0.50 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4150 0.48/0.53 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15/0.25
AISI 4161 0.56/0.64 0.75/1.00 0.035 0.040 0.20/0.35 --- 0.70/0.90 0.25/0.35
AISI 4320 0.17/0.22 0.45/0.65 0.035 0.040 0.20/0.35 1.65/2.00 0.40/0.60 0.20/0.30
AISI 4340 0.38/0.43 0.60/0.80 0.035 0.040 0.20/0.35 1.65/2.00 0.70/0.90 0.20/0.30
AISI 4419 0.18/0.23 0.45/0.65 0.035 0.040 0.20/0.35 --- --- 0.45/0.60
AISI 4615 0.13/0.18 0.45/0.65 0.035 0.040 0.20/0.35 1.65/2.00 --- 0.20/0.30
AISI 4620 0.17/0.22 0.45/0.65 0.035 0.040 0.20/0.35 1.65/2.00 --- 0.20/0.30
AISI 4621 0.18/0.23 0.70/0.90 0.035 0.040 0.20/0.35 1.65/2.00 --- 0.20/0.30
AISI 4626 0.24/0.29 0.45/0.65 0.035 0.040 0.20/0.35 0.70/1.00 --- 0.15/0.25
AISI 4718 0.16/0.21 0.70/0.90 0.035 0.040 0.20/0.35 0.90/1.20 0.35/0.55 0.30/0.40
AISI 4720 0.17/0.22 0.50/0.70 0.035 0.040 0.20/0.35 0.90/1.20 0.35/0.55 0.15/0.25
AISI 4815 0.13/0.18 0.40/0.60 0.035 0.040 0.20/0.35 3.25/3.75 --- 0.20/0.30
AISI 4817 0.15/0.20 0.40/0.60 0.035 0.040 0.20/0.35 3.25/3.75 --- 0.20/0.30
AISI 4820 0.18/0.23 0.50/0.70 0.035 0.040 0.20/0.35 3.25/3.75 --- 0.20/0.30
AISI 5120 0.17/0.22 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.70/0.90 ---
AISI 5130 0.28/0.33 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.80/1.10 ---
AISI 5132 0.30/0.35 0.60/0.80 0.035 0.040 0.20/0.35 --- 0.75/1.00 ---
AISI 5135 0.33/0.38 0.60/0.80 0.035 0.040 0.20/0.35 --- 0.80/1.05 ---
AISI 5140 0.38/0.43 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.70/0.90 ---
AISI 5145 0.43/0.48 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.70/0.90 ---
AISI 5147 0.46/0.51 0.70/0.95 0.035 0.040 0.20/0.35 --- 0.85/1.15 ---
AISI 5150 0.48/0.53 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.70/0.90 ---
AISI 5155 0.51/0.59 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.70/0.90 ---
AISI 6150 0.48/0.53 0.70/0.90 0.035 0.040 0.20/0.35 --- 0.80/1.10 0.15 min.
AISI 8615 0.13/0.18 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8617 0.15/0.20 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8620 0.18/0.23 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8622 0.20/0.25 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8625 0.23/0.28 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8627 0.25/0.30 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8630 0.28/0.33 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8637 0.35/0.40 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8640 0.38/0.43 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8642 0.40/0.45 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8645 0.43/0.48 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8655 0.51/0.59 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.15/0.25
AISI 8720 0.18/0.23 0.70/0.90 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.20/0.30
AISI 8740 0.38/0.43 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.20/0.30
AISI 8822 0.20/0.25 0.75/1.00 0.035 0.040 0.20/0.35 0.40/0.70 0.40/0.60 0.30/0.40
AISI 9254 0.51/0.59 0.60/0.80 0.035 0.040 1.20/1.60 0.60/0.80 --- ---
AISI 9255 0.51/0.59 0.70/0.95 0.035 0.040 1.80/2.20 --- --- ---
AISI 9260 0.56/0.64 0.75/1.00 0.035 0.040 1.80/2.20 --- --- ---
Mechanical Properties of ASTM A182 Low Alloy Steels
Grade Tensile Strength
min. ksi[MPa]		 Yield Strength
min. ksi[MPa]		 Elongation, min. % Reduction of
Area, min. %		 Brinell Hardness
Number, HBW
F1 70[485] 40[275] 20 30 143-192
F2 70[485] 40[275] 20 30 143-192
F5 70[485] 40[275] 20 35 143-217
F5a 90[620] 65[450] 22 50 187-248
F9 85[585] 55[380] 20 40 179-217
F11 90[620] 64[440] 18 40 187-248
F91 90[620] 60[415] 20 40 190-248
F92 90[620] 64[440] 20 45 ≤269